VEVOR Rear Drive Shaft, 80.0″-81.6″ Prop Shaft Driveshaft Assembly Compatible with 2007-2014 Ford Edge & Lincoln MKX, Replace #DT4Z-4R602-A DT4Z4R602A 7T4Z4R602A SK936846 936-846 65-2027

Compatible with 2007-2014 Ford Edge & Lincoln MKX, 80.0″-81.6″ Shaft

You can use the VEVOR Ford drive shaft with any Ford Edge or Lincoln MKX model from 2007 to 2014. Its shaft length is between 80.0″ and 81.6″, ensuring a precise fit in the drivetrain. This exact fit makes it easy for power to flow from the engine to the back wheels.

It delivers reliable power transfer consistent with the vehicle’s original performance. Accurate measurements reduce stress and wear on other parts of the drivetrain. The drivers can enjoy a safe and stable ride. Its precise engineering ensures it works well for a long time and is easy to install.

Replace #DT4Z-4R602-A, DT4Z4R602A, 7T4Z4R602A, SK936846, 936-846, 65-2027

You can use the VEVOR Ford drive shaft instead of OEM parts (DT4Z-4R602-A, DT4Z-4R602A, 7T-4Z-4R602A, SK936846, 936-846, and 65-2027). It fits perfectly without any changes. This procedure ensures the car quickly and correctly returns to its factory-level performance.

If you match these OEM numbers, the parts will fit correctly and the fittings will be safe. The drive shaft fits perfectly with the other parts of the engine. It reduces startup mistakes and ensures everything runs smoothly. When restoring drivetrain efficiency, owners can be sure their vehicles will always deliver power and perform well for a long time.

Fully Assembled Prop Shaft with Pre-Greased Slip Yokes & U-Joints

You can put the VEVOR drive shaft right away because it comes fully assembled. With its pre-greased slip yokes and universal joints, it has less wear and friction. This design ensures everything works well from the very first run. Users don’t have to put parts together or add extra grease, which saves them time and work.

Additionally, the pre-greased parts make the drive shaft more durable and last longer. That means they work reliably in both light and heavy snow situations. This ready-to-use assembly makes it easy for techs and do-it-yourselfers to quickly install the shaft, keeping it in the right place and ensuring power moves smoothly through the drivetrain.

Dynamic Balance Tested Driveshaft Reducing Noise & Vibration

At the workshop, the VEVOR Ford drive shaft is dynamically balanced to reduce noise and vibration. This test ensures the rotation is smooth and the process is stable while driving. It keeps the car steady while sending constant torque to the wheels. It will be easier to control and quieter to ride, regardless of road conditions.

Precise balance stops shaking and evens out the flow of power. Other parts of the engine, like bearings and joints, don’t wear out as quickly when there is less vibration. The balanced design maintains effective torque transfer at high speeds. Overall, it makes driving more enjoyable by ensuring smooth, dependable performance while the car is moving.

Thickened Heat-Treated Alloy Steel with Protective Paint Coating

The alloy steel used to make the VEVOR drive shaft has been heated and hardened. This strong material doesn’t break easily when it gets bent, twisted, or hit. It maintains its shape and strength even under overload. The shaft can handle rough road conditions without compromising performance or causing engine issues.

A protective paint layer makes rust and corrosion even less likely. The coating protects the shaft from water, salt, and other environmental factors. Combined with heat treatment, it ensures that toughness lasts long. After years of regular use, drivers can count on the engine to continue working safely and efficiently.

Universal Joint Ensures Efficient & Reliable Torque Delivery

The robust universal joint on the VEVOR Ford drive shaft efficiently transfers torque from the transmission to the wheels. It keeps the power flowing smoothly even when the vehicle speeds up, turns, or the load changes. This joint keeps the car running smoothly without stopping. It does its job by reducing stress on the drivetrain.

The strong form of the universal joint makes it reliable for a long time. When the drive shaft is constantly turning and under heavy load, it supports itself. It protects other parts and extends their lifespan by maintaining steady torque transfer. Drivers can enjoy stable performance and effective power output no matter the weather.

Ford Drive Shaft with High-Strength Materials for Long-Lasting Durability

They used strong materials to make the VEVOR Ford drive shaft so it can handle rough driving situations. Its design makes it resistant to wear, bending, and twisting. This attribute ensures that success will last over time. The shaft maintains its shape and strength even under heavy stress, ensuring drivers have a reliable power supply for a long time.

The drive shaft is designed for repeated use; it can withstand steady torque and mechanical stress without breaking. Other parts of the engine won’t wear out as quickly because the materials are strong. Vehicle owners benefit from a reliable, long-lasting part that keeps their vehicles running safely and efficiently.

Ford Drive Shaft: 80.0-81.6″ Length & 2.5″ Diameter for Optimal Installation

The exact length and width of the VEVOR Ford drive shaft are 80.0 to 81.6 inches and 2.5 inches, respectively. These same measures guarantee a perfect fit in compatible cars. When you align the shaft correctly, you reduce stress on the mounting points and other drivetrain components. This lets the shaft work well from the very first time you put it on.

When the sizes are right, the power goes to the wheels smoothly and consistently. It stops shaking, wobbling, and misalignment while you’re moving. With these specs, the drive shaft fits perfectly with the original setup and works reliably and for a long time as an OEM-standard replacement part for Ford Edge and Lincoln MKX models from 2007 to 2014.