VEVOR Plant Fan, Grow Tent Clip On Fan, Type-C Port with 9 Speeds & Circulation Mode, Smart Control, Powerful Oscillating, for Hydroponics Circulation Cooling, Black, 2 Pack

125 CFM Dual-Motor System with 5-Blade Fan for Maximum Airflow

This 2-pack of units features a separate dual-motor design for each unit, with a 5-blade ABS fan that delivers up to 125 CFM of focused airflow to your grow space. That level of airflow consistently circulates CO₂ throughout your plant canopy, directly supporting higher leaf absorption during photosynthesis. The motors provide constant, reliable output from seedling to full maturity, with no performance degradation over long run times.

Energy consumption remains low even when operated 24/7, since the fan draws only 10 W total on a 12 V DC power supply. This efficiency makes it a feasible solution for growers needing 24/7 airflow throughout long growth cycles. Whether you’re running a single tent or many tents in the same space, the 125 CFM output handles circulation without much of a power expenditure.

10 Speed Levels with Automatic Natural Breeze Mode for Every Growth Stage

The clip on grow tent fan has 9 fixed-speed modes ranging from 1.3 m/s to 3.9 m/s, plus a 10th automated circulation mode that simulates natural wind. The low speeds are good for delicate seedlings that can’t tolerate strong direct airflow, while the higher settings are sufficient to move air through dense canopies in late flowering. With the entire spectrum built into the unit, you will not have to change fans as your plants go through the different stages of growth.

And the auto-circulation mode on level 10 also adjusts speeds to more closely mimic a wind pattern of true outdoor conditions. This mode handles that change without any manual adjustment on your part, and plants do better with varying airflow than with a steady stream. In all 10 settings, noise remains at 48 dB or less, so even in rooms where you’re working closely, the fan is silent.

45° and 90° Smart Oscillation for Wide Clip On Grow Tent Fan Coverage

This clip on grow tent fan features automatic oscillation in the 45° and 90° directions, enabling it to sweep air over a much broader area than a fixed-direction model. The 90° setting provides wide coverage of the clip on grow tent fan in a single pass, eliminating dead patches where stagnant air tends to accumulate. The 45° option is also available for more directed coverage when you want to direct airflow on a specific section of your canopy.

In addition to horizontal oscillation, the fan has a controlled vertical tilt, allowing you to point the airflow up or down depending on your plants’ height. This combo of automated sweep and manual tilt control mimics a more natural wind environment inside your tent. This diversified, multidirectional airflow helps grow stronger stems and limit moisture accumulation on leaves, reducing the risk of mold and other fungal issues.

2-Pack Clip On Grow Tent Fan Layout for Balanced Air Distribution

This 2-pack set lets you clip one fan on each side of your grow tent to provide balanced, cross-directional airflow. Fans facing each other eliminate the dead zone a single unit creates (particularly in tents over 3 feet wide). Each fan is approximately 2.4 lbs and 8.1 x 7.9 x 9.3 inches, small enough to place without blocking light or overwhelming your canopy.

The clip mechanism grabs tent poles and crossbars tightly; no tools or permanent hardware required. Once mounted, continuous oscillation cycles keep the lightweight body in place, preventing sagging and slippage over time. This dual-fan setup ensures that all parts of your grow tent receive balanced airflow, reducing hot spots and keeping the air circulating evenly around your plants.

Type-C Power Input with 1.5 m Cable for Clean Tent Wiring

Each clip on grow tent fan comes with its own 1.5m Type-C to Type-C cable, providing plenty of length to route power neatly without extension cords cluttering your grow room. The Type-C connection is compatible with power banks and DC power sources, so you can locate your power source wherever it fits best, inside or outside the tent. This versatility is especially helpful in tight installations when wall outlets are far from your preferred mounting spots.

Note: Each item requires a 12 V/1 A adapter to operate correctly; the fan will not work with standard 5 V/1 A or 5 V/2 A adapters. The Type-C’s compact size and the cable’s length make cable management a breeze once the proper adapter is plugged in. And running two fans on separate wires means that if one disconnects, you don’t have to take your entire circulation system down all at once.

Durable ABS Housing with Quiet 48 dB Operation for Round-the-Clock Use

The outer shell is made of tough ABS plastic, which can withstand the warm, humid environment inside most grow tents. While lesser materials may distort or shatter under persistent heat and moisture, ABS retains its shape and structural integrity season after season. Both units in this pair are housed in the same robust casing, so they age evenly, and neither fails before the other.

Noise output at all speed settings is at or below 48 dB, the equivalent of a calm conversation in the same room. That low sound profile means you may run these fans overnight or in shared living situations without being a distraction. The silent operation makes the tent area a more comfortable place to work around during feeding, trimming, and regular inspection routines for growers who check on their plants often.