VEVOR Gas Powered Water Pump, 3 in, 264 GPM 7HP Semi Trash Water Transfer Pump Portable, Gasoline Engine with 25 ft Discharge Hose, Heavy Duty Frame, Cast Iron Impeller, for Irrigation, Ponds, Pools

7HP Engine Delivers Stable Output on a 3 Inch Semi Trash Water Pump

This VEVOR 3 inch semi trash water pump is powered by a 7 HP gasoline engine, which can run at 3800 RPM at no load and maintain 3730 RPM at full load. Because it has the same speed range, the pump maintains a constant water flow, whether you use it for 20 minutes or several hours straight. You won’t see the performance hit that doubles a job’s duration.

That regular output is most important for high-intensity or continuous pumping jobs, when a non-steady pump might cost you time and productivity. The engine is calibrated to hold RPM under pressure, which immediately helps steady discharge flow at the output. Add to that a fuel-efficient design, and you get a solid, reliable performer that won’t guzzle fuel, a sensible mix of power and efficiency for ordinary to challenging water transfer applications.

264 GPM Max Flow Rate for Fast, High-Volume Water Transfer

That is a top flow rate of 264 gallons per minute, meaning this pump delivers large volumes of water quickly. The 3-inch port size (76.2 mm) is well-suited for high-throughput flow and can handle water carrying light debris, precisely what semi-trash applications call for. This amount of production is perfect for jobs that require speed and volume.

This set comes with a 25-foot discharge hose so you may extend your reach right out of the box. That’s enough length to handle most standard drainage and irrigation installations without having to hunt out more hose on day one. Whether you are draining a flooded low area, filling a large holding tank, or delivering irrigation water to crop rows, the 264 GPM flow rate keeps the job moving at a pace that manual or lower-capacity options can’t match.

142 ft Max Head Lift for Uphill Irrigation and Elevated Drainage

This pump offers a maximum head lift of 142 feet (43 meters), enabling it to lift water to heights that most regular transfer pumps can’t reliably reach. It maintains pressure and flow at that head height. For hillside irrigation, multi-story building site drainage, and filling high storage tanks, the pump handles them easily. It is an important standard for anyone working on uneven, steep terrain.

The pump can be located far from the water source, as the maximum suction lift on the intake side is 23 feet (7 meters), allowing pumping from ditches, ponds, and shallow wells. The large-head lift and robust suction lift provide operators with options at both ends of the water channel. You’re not confined to level ground or perfect setups. The pump adapts to the conditions you’re really working in, making it a great fit for real-world ag and construction situations.

Cast Iron Impeller and Aluminum Alloy Body for Lasting Durability

The pump body is made of aluminum alloy, making it sturdy yet light enough to move and reposition with ease. Aluminum is a good choice for a portable pump; it can withstand long-term exposure to water, outdoor storage, and use in demanding field settings without issue. You’re not buying a unit that will start to corrode after a season or two of normal use.

Under the pump’s center is a cast-iron impeller, selected for its wear resistance in abrasive pumping conditions. The plastic material cannot handle aqueous particles as well as cast iron does over time. The manufacturer recommends using a strainer filter screen during operation to protect internal components and maintain peak performance. The aluminum body and cast-iron impeller combination means a pump built to last. Fewer breaks, less money spent on maintenance, and more reliable output season after season.

Gas-Powered Engine for Independent Off-Grid and Emergency Operation

This 3 inch semi trash water pump is only gasoline-powered, so it doesn’t need to be plugged in to work. That independence makes it a practical solution for farms, isolated work locations, and rural properties with limited or unpredictable power supply. It is just as useful in emergencies, flood response, storm drainage, or any time the grid goes down and water still has to move.

The engine is fuel-efficient (≤382 g/kW·h), ensuring low running costs even during long pumping durations. Burn less gasoline per kilowatt hour, and you can go longer between fill-ups, handy if you’re working on a big drainage or irrigation job. The frame-mount design enhances portability and allows easy relocation across a construction site without tools or complex setup. Get it started, relocate it where it’s required, and get to work.

3 Inch Semi Trash Water Pump Built for Farms, Ponds, and Construction Sites

This 3 inch semi trash water pump is designed for the diverse, real-world water management jobs that require both capacity and dependability. It transports water from ponds, ditches, and tanks to irrigation fields, it handles site dewatering after heavy rain, and assists with routine drainage work in agricultural and construction settings. The semi-trash rating means it will manage water with light solids without clogging under usual use.

Farmers will appreciate the high flow rate and head lift for working in wide fields and on rough terrain. Contractors use a portable, no-power-required machine that can be set up quickly and easily anywhere on-site drainage is needed. Property managers or pool owners with seasonal flooding will love how well it handles volume without a fuss. Its rugged frame keeps the pump steady on uneven ground, and its cast-iron impeller ensures it will withstand multiple cycles of severe operation. From daily irrigation to urgent emergency drainage, this pump is built to tackle it.