VEVOR Fuel Transfer Pump, 12V DC 20 GPM 1/4 HP Diesel Pump, Extractor Pumps with Manual Nozzle, Discharge Hose and Suction Pipe, for Gasoline, Diesel, Kerosene, Ethanol-Methanol Blends & Biodiesel

Rapid 20 GPM Flow Rate for a 22-Second Tractor Refuel

The VEVOR electric fuel transfer pump 12V features a powerful 1/4 HP motor that operates at 2000 RPM. This efficient motor drives the pump to deliver a high flow rate of up to 20 gallons per minute (GPM), reducing the time you spend refueling. The pump is not only fast but also powerful; it is capable of a head lift of over 26.2 feet and a suction lift of 9.8 feet.

This ensures consistent and strong performance, even when transferring fuel from a far distance. It makes fueling up take just a few minutes.

Heavy-Duty Cast Iron Body for Lasting Durability

The main body of this transfer pump is made from heavy-duty cast iron, a material that is very strong. The cast iron is treated with a rust-resistant electrophoresis coating process in order to make it very durable. This protective finish shields the pump from corrosion caused by exposure to fuel and moisture.

The internal components are also built for longevity. The pump features a high-pressure-resistant and corrosion-resistant rotor, ensuring smooth and reliable operation over its lifespan. The high-torque motor is equipped with overcurrent and thermal overload protection, which automatically shuts the unit down to prevent overheating and damage.

Smart Electric Fuel Transfer Pump 12V Nozzle Holder with Auto Start/Stop for Easy Operation

This fuel transfer pump is designed with an intelligent and convenient nozzle housing system that simplifies operation and prevents messy spills. The system has a switch that is activated by the nozzle’s placement. When you pick up the nozzle to begin fueling, the pump automatically starts. When you are finished, place the nozzle back in its secure holder, and the pump automatically stops.

This automated function is user-friendly. It makes the refueling process safer and neater. The aluminum alloy fuel collection box, which also serves as the nozzle holder, is designed to catch any fuel drips from the nozzle after use. This prevents fuel from dripping onto your vehicle, equipment, or the ground.

Complete Pumping Kit with 13ft Hose for a Convenient Setup

VEVOR’s Electric Fuel Transfer Pump 12v comes in an all-in-one kit, providing you with everything needed for installation. The set includes a 13.1-foot rubber discharge hose, offering a wide range of fueling capability. It also comes with an adjustable, suction pipe that extends from 20.87 to 37.79 inches to accommodate various tank and barrel depths.

The kit also includes the manual fuel nozzle, a secure connector, and a roll of PTFE tape to ensure tight connections on all kinds of fittings. This package makes it easier to assemble and use the pump without extra accessories.

Extended 18ft Power Cord for Long-Distance Fuel Transfer

This electric fuel transfer pump 12v is equipped with an extended 18-foot power cord, providing significant reach and flexibility. This long cord allows you to easily connect the pump to your vehicle’s 12V DC battery, even if the fuel tank or barrel is located at a distance from the power source. This eliminates the need for frequent pump movement or the use of additional extension cords.

As illustrated, this extended reach is suitable for agricultural settings, where you might be refueling a tractor in the middle of a field from a tank in your truck bed. It’s also ideal for construction sites, off-roading, and marine applications where the fuel source and the vehicle being refueled may not be right next to each other.

Rust-Resistant Telescoping Fuel Inlet for Various Tank Depths

The fuel inlet hose is a rust-resistant, telescoping suction pipe made from carbon steel with a galvanized surface treatment. This durable construction prevents corrosion from the inside out, ensuring a clean and smooth flow of fuel. The key feature of this pipe is its adjustable length, which can be set anywhere from 1.57 feet to 3.07 feet (20.87–37.79 inches).

This adjustable length enables the pump to draw fuel from different types of containers. It is short enough to work with shallow transfer tanks in the bed of a truck and long enough to reach the bottom of standard 55-gallon barrels. This eliminates the need for multiple suction pipes or makeshift extensions.

Corrosion-Resistant Aluminum Electric Fuel Transfer Pump 12v Nozzle for Precise Fuel Control

The included manual nozzle is crafted from corrosion-resistant aluminum alloy, making sure it can handle different kinds of fuel. The manual design of the nozzle gives you direct and precise control over the flow of the fuel, allowing you to easily manage the fill rate and prevent overfills and spills.

The nozzle is designed for convenient use. It also features a reliable cutoff function that makes it easier to stop the flow when needed. The durability of the aluminum construction ensures it can withstand the bumps and drops that are common in a work environment.