VEVOR Electric Trailer Jack, 7500 lbs Capacity, Electric Power Tongue Jack with Waterproof Protective Cover & LED Light for Travel Trailer, Camper, RV, 9.84-27.84 in Lift, 12V DC with Wiring, Black

7500 lb Electric Trailer Jack Handles Boat, Equipment, and Travel Trailer Loads with Confidence

The VEVOR 7500 lb electric trailer jack can lift to 7,500 lbs (about 3,400 kg) of tongue weight. It has the structural strength needed for boat trailers, equipment haulers, campers, and full sized travel trailers without bending or wobbling while lifting. This load rating puts it firmly in the strong category, giving operators the confidence to lift, so hitching and unhitching feel safe and predictable, no matter how much the trailer weighs.

The jack’s mechanical design keeps the lift force steady across the entire stroke range, so it doesn’t lose speed or power like lower-rated units do when loads approach their limits. For people who own RVs or trailers and use heavy equipment often, the 7,500 lb rating is more than just a number. It is a key specification that can make the towing process either easier or more stressful.

Dual Mode Control System Pairs Rocker Switch and Handheld Remote for Near and Far Operation

The dual-mode control system on this electric trailer jack is one of its best features. It has a mounted rocker switch and a handheld remote that let operators choose how they want to lift and lower the trailer. The rocker switch lets you make small changes when you can get to the trailer directly, and the remote lets you operate it from a distance, so you don’t have to bend down, crouch, or stay in touch with the jack while you’re hitching up.

A real ergonomic benefit of setting up a trailer is that it makes it easier on the body, especially for people who hitch and unhitch trailers a lot during a workday or travel season. Taking away the need to bend over and put your body in awkward positions around the tongue makes manual jacks less tiring and less likely to cause back strain over time.

9.84–33.85 in Total Height Range with 5 Position Drop Leg, Adding 6 in of Quick Travel

Any tongue jack needs to be able to adjust its height, and this one can do that from 9.84 to 33.85 inches (250 to 860 mm) thanks to its powered lift stroke and 5 position adjustable drop leg. The drop leg alone adds 6 inches (152 mm) of fast mechanical travel, which lets operators quickly close large height gaps before using the electric motor for fine-tuning.

Because this height range is so wide, the jack can work with a wide range of tow vehicles, coupler heights, and uneven ground conditions that would stop a jack with a smaller operating window. This unit can handle campsites with sloped or uneven ground, loading docks with raised surfaces, and various tow vehicles without having to move the trailer or use extra blocks.

90° Rotating Base Clears Pickup Tailgate Without Drilling or Mounting Modifications

The 90 degree clockable base is an engineering detail that fixes a specific and annoying problem in the real world: when loading or unloading a pickup truck, the jack’s mounting position gets in the way of the tailgate. Rotating the base 90 degrees moves the whole jack assembly out of the way of the tailgate’s swing path.

You don’t need to drill, use adapter plates, or make anything special to get this clearance. The rotation mechanism is built right into the base design and can be adjusted by hand. For people who drive trucks and trailers and need to reach the tailgate to load, this feature eliminates a step that would have required them to detach and reattach the jack each time.

Coated Inner and Outer Tubes with Weatherproof Cover Protect Against Corrosion and Moisture

The telescoping tubes of this 7500 lb electric trailer jack are coated on both inner and outer surfaces to resist corrosion from moisture, road salt, mud, and the general environmental exposure that trailer equipment endures through regular outdoor use. Coating both surfaces, not just the exterior, prevents water ingress during retraction and stops rust from developing from the inside out.

The included weatherproof protective cover adds a physical barrier against direct rain, spray, and debris contact when the jack is in the retracted position during transit or storage. Together, the coated tubes and weather cover form a two-layer protection system that significantly extends the service life of the jack’s mechanical components in climates where moisture and temperature variation are constants.

7500 lb Electric Trailer Jack Integrated LED Work Light Supports Low Light Hitching and Pre Dawn Departure Setup

Not all trailer hitching happens in good lighting. The built-in LED work light on this electric trailer jack shines directly on the tongue and hitch area, so operators can clearly see alignment, coupler engagement, and safety latch status without needing a separate flashlight or a second person to hold a light while they connect the trailer.

LED lights use less energy and last longer than incandescent lights. They draw very little current from the same 12V DC system that powers the lift motor, so they don’t drain the tow vehicle’s battery during short hitching sessions. The positioned light angle is designed to cast useful coverage over the working area rather than creating glare that reduces visibility.

Manual Top Crank Backup Ensures Full Operability During 12V Power Loss or Battery Failure

Electrical systems on trailers and tow vehicles are reliable under normal conditions. Still, power loss during a remote camping trip, a long haul drive, or an emergency roadside situation is a real operational risk that purely electric jacks cannot address. This 7500 lb electric trailer jack has a manual top crank that lets you raise or lower the jack by hand if there is no 12V power.

This means you can still hitch or unhitch the trailer, even if the electrical system is not working. The top crank uses the same lifting mechanism as the electric motor, so it can lift the full 7,500 lb rated load in manual mode without needing a separate tool or adapter. Operators switch to manual mode and continue working at a slower pace until power returns or the task is complete.