VEVOR Electric Pressure Washer Pump Kit, 1220 PSI, 2.2 GPM, Triplex Power Washer Pump with 2 HP Motor 120 V, Includes Wall Mount Bracket, Spray Gun, Wand, Hose, 5 Nozzles, for Washing Cars, Gardens

1220 PSI Power Washer with Triplex Pump for Steady Pressure Output

This VEVOR power washer with triplex pump delivers 1220 PSI, so it can blast away filth, mildew, and gunk without damaging the surface underneath. The triplex pump design has three plungers that act sequentially, providing a steadier, more uniform flow of water than wobbling or axial-piston pumps. That uniformity is important when you are cleaning roads, siding, or automobiles, where uneven pressure can leave streaks or cause damage.

With a triplex mechanism, pressure remains steady throughout the entire cleaning period. Single plunger setups tend to pulse. This results in less wear on the pump internals and an extended total service life for the unit. This power washer with triplex pump keeps a job flowing without interruption, whether you’re maintaining a weekend driveway or regularly washing down equipment.

2 HP Motor and 2.2 GPM Max Flow for Rapid Cleaning Coverage

The built-in 2 HP motor runs off a common 120V household outlet, so you don’t need any extra wiring or a separate circuit in most installations. It runs the pump to push water at a top speed of 2.2 GPM. This is fast enough to cover large surface areas quickly, so you don’t have to constantly move it around. This mix of motor power and flow capacity is a realistic sweet spot between cleaning speed and manageable energy use.

Higher flow rates enable you to rinse off loose debris more quickly, significantly reducing the total time spent on each cleaning job. This unit can handle tasks like washing patio furniture, garden walkways, and vehicle exteriors with solid efficiency at 2.2 GPM. The 120V rating of the motor means no need to bring in an electrician or run new wiring – plug it in and go to work right out of the box.

Ceramic Plunger and Brass Head for Leak Reduction and Lasting Durability

The seal area is one of the weak spots in many pressure washer pumps, where frequent cycling at high pressure causes wear and eventual leaking. This item solves that problem with ceramic plungers that are tougher and smoother than regular stainless steel counterparts. The ceramic surface provides a better seal against the packing. This reduces friction and lengthens the period between seal replacements.

The power washer with triplex pump head is not made of aluminum or plastic but of brass, which is much more corrosion-resistant over long periods of operation. Brass handles withstand repeated contact with water and cleaning chemicals without eroding, unlike softer metals during months of constant use. Paired with the 20CrMnTi alloy body and a built-in unloader valve for pressure adjustment, the assembly is designed to withstand prolonged high-pressure use with reduced leakage and downtime.

Adjustable Pressure Settings for Safe Use on Different Surfaces

Not every cleaning job requires the full 1220 PSI, and this machine lets you dial things back when needed. Lower pressure settings allow you to safely wash painted surfaces, window screens, and wooden decks without removing finishes or splintering material. A triplex pump gives your power washer the ability to vary between high and low output, so you don’t need different equipment for different tasks.

The kit comes with 5 interchangeable nozzles, giving you even more control over the spray pattern and intensity. It ranges from a thin, focused stream for tough grease spots to a broad fan for comprehensive cleaning. Each nozzle alters the way the water strikes the surface. The flexibility of this machine makes it practical for everything from delicate garden watering equipment to vigorous concrete and asphalt cleaning.

Complete Power Washer with Triplex Pump Kit for Easy Wall-Mount Setup

Everything you need to get started is included in the package, including a wall-mounted bracket, a 4.9-ft intake hose, a spray gun, a wand, and storage hooks. The wall-mount bracket firmly holds the 81.24-lb unit off the floor, saving space in a garage or shed while positioning the pump at a convenient operating height. Additionally, the wall mounting helps to prevent the transmission of vibrations to adjacent surfaces during operation.

The supplied spray cannon and wand attach directly to the pump’s 3/8” NPT outlet without adapters or additional fittings. Hook mounts keep the cannon, wand, and hose organized and easily accessible while the device is not in use. It’s all in one package, so there’s no stress of finding compatible accessories separately, and the whole setup takes minutes, not hours.

Universal 3/4″ Inlet and 3/8″ NPT Outlet for Hassle-Free Connection

The power washer with triplex pump offers a standard 3/4″ inlet and a 3/8″ NPT-threaded outlet, which correspond to the most common hose and fitting sizes used in residential and light commercial applications. The compatibility lets you connect the device to an existing garden hose on the inlet side and run a standard high-pressure hose on the outlet side without needing adapters. This also makes this pump an easy retrofit for older systems where the plumbing already uses these standard sizes.

If you have a different brand or model and are looking for better performance, this power washer with a triplex pump is designed to be swapped in without extensive repiping. The sizes of the standard threads ensure a secure join, with little chance of cross-threading or loose fittings. Its compact footprint measures 21.46 x 12.80 x 11.42 inches and weighs 81.24 lbs; fits into most existing wall-mount installations without structural adjustments.