VEVOR Electric Hydraulic Pump, 750W 10,000 PSI, 120V Single Acting Electric Driven Hydraulic Pump Power Pack Unit, with Solenoid Valve, 0.53 Gallon / 2L, for Punching, Bending, Single Acting Cylinders

10000 PSI Electric Hydraulic Pump for Maximum Lifting Power

This 10000 PSI electric hydraulic pump is designed to provide the reliable pressure needed for heavy tasks. With a maximum hydraulic pressure rating of 10,000 PSI, it can effortlessly propel single-acting cylinders through difficult operations such as bending, pushing, straightening, and cutting. You won’t have to wait on sluggish, underpowered machinery since the maximum flow rate of 5 L/min maintains cylinder action responsiveness.

As a single-acting power unit, the Model GYB-63D is intended for applications requiring controlled, one-direction hydraulic force rather than dual-direction cycling. This pump, which is built to withstand repeated cycles on the job site or in the shop, provides the working pressure to quickly pass through tough material, whether you’re using a shop press, a porta-power kit, or a hydraulic puller.

750W Motor Delivers Efficient Single-Acting Performance

There is no compressor, generator, or manual pump slowing you down because the main component of this device is a 750W electric motor that runs on a standard 120V outlet. Specifically designed for single-acting cylinder applications, the motor and pump work together to push oil in a single direction under load, then return it to the reservoir when the load is released.

Compared to dual-acting competitors, the single-acting design keeps the device lighter, easier to operate, and more reasonably priced while still providing you with actual operating pressure and flow. It plugs directly into a wall outlet for instant use anywhere power is available, making it a useful match for punching, bending, and lifting applications where you need a single, clean stroke of force rather than back-and-forth cylinder control.

10000 PSI Electric Hydraulic Pump Solenoid Valve Push-Button Control for Precise Oil Flow

Just as important as raw power is control. There are no manual levers to struggle with in the middle of a task because this machine employs a solenoid valve and a push-button switch to rapidly start, stop, and direct oil flow. When you’re positioning a load or need to stop sudden changes in resistance, that responsiveness really matters.

Compared to simple manual valves, this button-controlled solenoid system provides smoother, more reliable movement for tasks requiring accuracy, such as precise lifting, alignment, or cautious positioning. Instant on/off response and reliable oil-flow switching minimize overshoot and enable you to precisely adjust the cylinder’s stopping point, cycle after cycle.

8.2 ft Anti-Burst Hose with NPT 3/8″ Port for Long-Reach Use

Reach is important on actual job sites, and this pump comes with an 8.2-foot (2.5-meter) anti-burst hydraulic hose so you won’t have to move the entire unit each time you move work areas. This additional length reduces setup time by allowing you to place the pump down once and still operate comfortably over a larger area. When operating a 10000 PSI electric hydraulic pump under actual load, the anti-burst rating also indicates that the hose is designed to withstand abrupt pressure spikes without failing mid-job.

An NPT 3/8″ high-pressure output port, a popular thread standard that keeps you compatible with a wide variety of single-acting cylinders and accessories already on the market, is utilized to connect the hose. The standard port sizing eliminates the need to search for a proprietary fitting when a hose needs replacement.

0.53 Gal Oil Reservoir with Sight Glass for Easy Monitoring

The pump’s 0.53-gallon (2-liter) oil reservoir keeps it small enough to transport to a work site without compromising its ability to run for an entire work session. You can quickly check the fluid level through an integrated sight glass, saving you from having to guess or remove a cap while working to make sure you have enough oil left.

The device is ready to operate straight out of the packaging, with no need to buy additional fluid or wait for a fill-up, as oil is included in the box. This arrangement is designed to withstand frequent transport and outdoor exposure while remaining easy to top off or drain during maintenance, thanks to the corrosion-resistant reservoir casing.

Rugged Metal Housing Built for Industrial 10,000 PSI Jobs

This model is not a lightweight consumer tool; its metal casing is designed to withstand drops, vibrations, and the usual wear and tear of a busy shop or construction site. It is a practical choice for those who use hydraulic equipment every week rather than infrequently, since the architecture, when combined with the corrosion-resistant oil reservoir, is designed to withstand repeated use rather than fold under daily stress.

Instead of operating blind at maximum PSI for every operation, an integrated pressure gauge lets you set the precise working pressure for a task and monitor pressure in real time. This unit’s robust construction and actual 10000 PSI electric hydraulic pump rating set it apart from disposable, hobby-grade alternatives for anyone comparing hydraulic pumps for routine industrial or workshop use.