VEVOR Electric Hydraulic Pump, 750W 10,000 PSI, 120V Double Acting Electric Driven Hydraulic Pump Power Pack Unit, with Manual Valve, 2.1 Gallon / 8L, for Punching, Bending, Double Acting Cylinders

VEVOR 10000 PSI Electric Hydraulic Pump with 750W Motor for High-Efficiency Lift & Return

The VEVOR 10000 PSI electric hydraulic pump delivers the raw power and reliable performance tough industrial jobs demand. This pump has a 750W motor that builds pressure quickly and maintains steady pressure throughout all operations. This unit does all of those things without slowing down or losing pressure, whether you are lifting big things, pressing metal parts, or straightening structural parts. It’s an important part of any professional shop or industrial facility because the strong motor means you spend less time waiting and more time getting work done.

When it comes to tasks like bending, cutting, pushing, and straightening, this electric hydraulic pump handles them reliably. The 750W output delivers steady power to your hydraulic system, so it works smoothly and reliably from start to finish on every job.

Double-Acting Cylinder Control with 8 L/min Max Flow Rate for Precise Operation

The VEVOR 10000 PSI electric hydraulic pump is a true double-acting power unit, meaning you can fully control the extension and retraction strokes. This means you move the cylinder yourself in both directions, rather than relying on gravity or the spring to do so. This makes the movement faster and more accurate. This pump moves fluid through your system quickly and efficiently, with a maximum flow rate of 8 L/min. This keeps your process moving at full speed and reduces wait times between tasks.

Because it works in two ways, this pump is great for situations where controlled retraction is just as important as controlled extension. This method makes things more precise, which is helpful for people who run presses, make things, and do maintenance, especially when they have to work with tight tolerances or complicated bending sequences.

10000 PSI Electric Hydraulic Pump with 120V Manual Valve Design for Hassle-Free Adjustment

This 10000 PSI electric hydraulic pump uses 120V power, so you can plug it into any wall outlet and use it right away. You don’t need to do any wiring or electrical changes. The manual valve control system is easy to use and understand, so workers at all levels can quickly and safely adjust pressure and flow direction. The simple valve design also reduces the likelihood that you will accidentally operate it incorrectly, keeping your workplace safer and your tools better protected.

Manual valve control is easy for new users to learn with minimal training, while experienced operators appreciate its direct, responsive feel. Because it works with 120V, this pump is a good choice for garages, workshops, building sites, and other places with standard electrical outlets.

8.2 ft / 2.5 m Anti-Burst Hose with NPT 3/8″ Port for Long-Reach Compatibility

With the 8.2 ft (2.5 m) high-pressure hose that comes with the pump, you can move your cylinder or tool without moving the pump unit. This saves time and makes the job easier on the body, especially when working in small areas or on big projects. With a burst rating of 175 MPa and a three-layer steel wire design reinforced with rubber, the hose is built to withstand high-pressure operation.

Most likely, you already have many hydraulic cylinders, tools, and extras that work with the NPT 3/8″ output port. The port and hose fittings come with protective caps that keep them clean and free of dirt when the pump is not in use. This will make your connections last longer.

2.11 Gal / 8L Oil Reservoir with Sight Glass Window for Uninterrupted Workflow

This electric hydraulic pump has a 2.11-gallon (8L) oil tank, so you won’t have to stop and refill it as often during long jobs. If you have a big tank, it can run continuously for longer, which is especially helpful when you’re running repetitive cycles of pressing or bending in a work setting. The corrosion-resistant materials in the reservoir keep the oil and the interior parts clean over time.

You can quickly check the oil level through the built-in sight glass, without removing any covers or using a dipstick. This quick visual check keeps you from running the pump dry, which can hurt the parts inside. The pump works best with hydraulic oil grades 15 to 32, and the big reservoir capacity makes sure that you always have enough oil for even the toughest jobs.

100 MPa Precision Pressure Gauge for Safe Punching, Bending & Pressing Control

This 10000 PSI electric hydraulic pump has a precise pressure gauge that reads up to 100 MPa. It has marks in both PSI and MPa, so it’s easy to read no matter what unit system you prefer. The gauge shows your system’s pressure in real time, so you can set and maintain the exact force you need for jobs like punching, bending, pressing, and more.

With the gauge face’s clear markings, you can quickly read the pressure levels, even in poorly lit shops. You can safely push this pump to its highest rated pressure because you know the gauge will always reflect the system pressure.