VEVOR Electric Driven Hydraulic Pump, 750W 10,000 PSI, 120V Single Acting Hydraulic Pump Power Pack Unit, Solenoid Valve with Pedal Switch, 2.1 Gal / 8L, for Punching, Bending, Single Acting Cylinders

750W Motor with 10,000 PSI Max Pressure and 8 L/min Flow for High-Efficiency Industrial Power

VEVOR’s electric hydraulic pressure pump features a powerful 750W motor that delivers up to 10,000 PSI of pressure and flows 8 liters per minute. The high pressure and flow rate enable users to complete tough hydraulic tasks quickly and reliably, even after long-term use.

No matter if you’re operating a hydraulic cylinder or cutting through thick metal, this motor has the power you need to get the job done. Because the motor is highly efficient, it turns electrical power into hydraulic power with very little energy waste. This keeps costs low while improving every job.

120V Single-Acting Power Unit for Reliable Bending, Pressing, Straightening, and Cutting Jobs

You don’t need to do any special wiring or voltage switches to get this electric hydraulic pressure pump to work with outlets in the workshop or on the job site. It just plugs in and starts working. Since it has only single acting design, the hydraulic pressure can only flow in one direction. That makes it great for situations where the cylinder needs to expand under pressure and then shrink back down because of gravity or a spring.

Powerful hydraulics for cutting, pushing, and straightening. Its single-acting design delivers direct hydraulic force, making things easier and quicker.

Electric Hydraulic Pressure Pump: Solenoid Valve with Pedal Switch for Hands-Free Control

Its solenoid valve and foot pedal switch are two more great things about this electric hydraulic pressure pump. You don’t have to use your hands to run the pump with this setup. To start hydraulic operation, press the pedal.

It’s very helpful to be able to do this task without using your hands at work. Work faster and more safely without having to hold tools, move materials, or put workpieces down with both hands. You don’t have to reach for the manual controls while the machine is going with the pedal switch, so there is less chance of misalignment or mistakes.

8.2 ft / 2.5 mm Mistakes Hose with NPT 3/8″ Port for Long-Reach and Broad Compatibility

You can work on your project or use your hydraulic tool from a safer distance, as the 8.2 ft (2.5 m) high-pressure line that comes with the pump is 8.2 ft (2.5 m) above ground. The pump is easy to move around, so you do less work.

We made the hose to withstand high hydraulic pressure without breaking or bursting. That way, it will always work safely and consistently, under demanding conditions. Most workshops and building sites already have many hydraulic cylinders, tools, and accessories that you can use with the NPT 3/8″ port fitting.

2.11 Gal / 8L Oil Reservoir with Sight Glass Window for Easy Level Monitoring and Fewer Refills

There is a lot of oil in this electric hydraulic pressure pump’s 8.4-liter (2.11-gallon) oil tank. It will last longer, so you won’t have to fill it up as often during long tasks. The pump can keep the same hydraulic pressure for longer if the oil tank is bigger. This means you can keep working without having to stop and add more oil.

The built-in sight glass window makes it easy and quick to check the oil level. You can see right away if the tank needs any help by looking out the window. You no longer need to open the tank or use a tester. This saves time and keeps your work going.

15–32# Recommended Hydraulic Oil Grade for Optimal Flow and Pump Performance

There is a lot of oil in this electric hydraulic pressure pump’s 8.4-liter (2.11-gallon) oil tank. It will last longer, so you won’t have to fill it up as often during long tasks. The pump can keep the same hydraulic pressure for longer if the oil tank is bigger. This means you can keep working without having to stop and add more oil.

The built-in sight glass window makes it easy and quick to check the oil level. You can see right away if the tank needs any help by looking out the window. You no longer need to open the tank or use a tester. This saves time and keeps your work going.

Electric Hydraulic Pressure Pump Accurate Pressure Gauge with 100 MPa Max Rating

Using the built-in pressure gauge on this pump, you can monitor hydraulic pressure at any time while it’s working. The gauge can read up to 100 MPa, which is the full pressure range of the pump. This lets you monitor pressure accurately at all stages of your job, from startup and ramp-up to full working pressure.

If you don’t keep a close eye on the pressure, you could damage the object or tools if you apply too much. You can set and maintain the exact pressure your application needs with the gauge, giving you complete confidence in every task.