VEVOR Diamond Blades 6.3 inch, 5-Pack Wall Chaser Saw Blade Cutting Blade, 0.87 in Arbor, High-Hardness Diamond Segments, 65Mn Steel Core, Dry Wet Cutting, Clean Edges for Concrete Brick Stone Cement

Diamond Segments with High Hardness for Durable Cutting Performance

Premium, high-hardness diamond segments designed for demanding cutting applications are featured in this pair of concrete diamond blades. With a height of 0.59 inches (15 mm), the segments provide sufficient cutting material that remains wear-resistant even after prolonged use. Because of this design, the blade can cut through sturdy materials such as concrete, brick, stone, and cement, even after several passes.

Quality diamond particles and uniform segment geometry directly translate to a longer usable blade life. Contractors and tradespeople enjoy fewer blade replacements and more consistent outcomes over a full day’s work. Because the diamond segments are resistant to friction and heat, they will retain their sharpness whether you are cutting dry or wet, making this set a good choice for frequent use in wall chasing and surface grooving.

65Mn Steel Core for Reduced Vibration and Stable Control

The middle part of the blade is made of 65Mn steel, which has good tensile strength and does not flex easily under pressure. The core is 0.06 in (1.5 mm) thick to provide structural strength with each cut, yet thin enough to limit the amount of material removed. Less effort for the operator, smoother operation, and cleaner channel walls.

One of the main causes of operator fatigue and cutting errors is vibration. Even when cutting through dense or uneven masonry surfaces, the blade stays on course thanks to the 65Mn steel core’s active vibration dampening. Improved control, smoother cuts, and a more comfortable experience, particularly when working for extended periods on plumbing pipe installations or electrical conduit channels.

Concrete Diamond Blades for Clear, Accurate Grooves with Segment Thickness of 2.4 mm

With a maximum segment thickness of 0.09 in (2.4 mm), these concrete diamond blades are carefully crafted to minimize material loss while producing narrow, well-defined grooves. Because the goal of wall chasing is to create a channel just large enough for wiring or pipes without damaging the surrounding building, the segment thickness must be exact. A smaller kerf facilitates faster cleanup following each pass and generates less dust and debris.

The sizes of the segments also impact the blade’s ability to remain straight during the cut. Lateral stability is maintained even at greater depths of groove, decreasing the likelihood of wandering or uneven channel walls. This level of dimensional accuracy is a big advantage for installers who need uniform grooves from one wall or surface to another, compared to generic cutting blades not designed for wall-chasing.

22.2 mm Arbor Diameter for Wide Wall Chaser Compatibility

When choosing blades for power tools, fitment is extremely important, and this set features a 0.87 in / 22.2 mm arbor diameter (+/-0.1 mm tolerance) to fit a variety of wall chaser machines used on job sites. Each set also includes brass bushings to enable rapid adaptation to slightly varying arbor sizes without extra hardware or special tools.

To begin cutting, simply insert the blade and tighten the arbor nut. The blade seats are centered thanks to homogeneous arbor machining, which reduces the wobbling that can occur with improperly toleranced blades. All wall chasers use the same blade. A universally compatible blade reduces workflow friction if you operate several wall chasers or switch between equipment in a single day. It keeps work moving forward without interruptions from incompatibilities.

High-Speed Performance with Concrete Diamond Blades Rated at 7000 RPM

The maximum blade speed of these concrete diamond blades is 7000 rpm. They are designed to withstand the output of a powerful wall-chaser machine without risking structural collapse at operating speed. During prolonged high-RPM cutting, the precision-bonded diamond segments and 65Mn steel core preserve the structural integrity and blade balance.

The ability to run at higher RPMs also means faster material removal per pass, which in turn reduces the number of strokes needed to achieve the desired groove depth. It directly reduces job time, particularly on larger projects with multiple walls or long channel lengths. They also have a 6.3 in / 160 mm blade diameter, which provides cutting-depth adaptability, allowing operators to adjust depth for varying pipe or conduit sizes without changing blades.

5-Piece Value Pack with Brass Bushings for Cost-Efficient Grooving

The kit comprises five 6.3 in / 160 mm blades with brass bushings, providing contractors with a ready-to-go stock of blades, useful for long-term projects or regular maintenance programs. The pack is lightweight and portable, weighing just 0.44 lbs (0.2 kg) per blade, making it a good choice for mobile tradespeople working at different project sites during the week.

Keeping a few blades around means you don’t have to wait for replacement orders to arrive when a blade wears out mid-project. The accompanying brass bushings add value by making them compatible with more wall chaser arbor setups. For jobs that require steady throughput – whether it is a home renovation, commercial fit-out, or infrastructure maintenance – this five-pack configuration provides reliable performance and better cost-per-cut value than purchasing individual blades.