VEVOR CV Axle Shaft Assembly, 2 Pieces Front Left & Right (Driver and Passenger Side), Automotive Replacement CV Joint Axles Pair Compatible with 2011-2014 Hyundai Sonata, Alloy Steel & Carbon Steel

OEM-Precision 28 Tooth Input and 27 Tooth Output Shaft Configuration

The exact OEM design features an input shaft with 28 teeth and an output shaft with 27 teeth on both the left and right sections. This ensures they fit perfectly with the drivetrain components of the 2011–2014 Hyundai Sonata. The correct number of splines helps reduce binding, vibration, and early wear that can happen when the specs are wrong. Each tooth is machined to OEM tolerances to ensure a smooth transmission and hub integration.

When compressed, the lengths of 38 to 39.7 inches (969 to 1009 mm) for the left side and 26.4 to 28 inches (671 to 711 mm) for the right side are the same as they were at the plant. This Hyundai Sonata CV axle replacement uses OEM part numbers Left 495003Q300 and Right 495013Q360 to make sure it works with your car and fits correctly.

High Strength Alloy Steel Hyundai Sonata CV Axle Construction Weighing 31.1 Pounds

The two-material design uses both alloy steel and carbon steel, which makes the parts very strong while still allowing the suspension to move freely. The fact that it weighs 31.1 pounds shows that it is well-built and can handle commuting, driving on the highway, and light off-road situations without any problems. Standard axles break down too soon because of heat, wear, and stress cycles, but this advanced metal doesn’t.

With its precise manufacturing, this Hyundai Sonata CV axle can withstand repeated stress cycles and road impacts while maintaining its dimensions. The robust construction prevents early wear and the annoying shaking that occurs when axles fail, so the part works reliably throughout its life.

Pre-Greased Neoprene Boot Protection with High-Temperature Molybdenum Grease

The sealed neoprene boot system provides superior protection against dirt, sand, and road debris that can enter the CV joint and cause it to fail. The boots come pre-filled with high-temperature molybdenum grease, which helps maintain lubrication under heavy stress and high heat. The flexible neoprene can handle full steering and suspension movement without breaking or cracking.

The pre-greased design ensures good lubrication from the start, and the high-temp moly grease prevents breakdown under operating temperatures. The strong boot design keeps dirt and debris out while letting the joint move freely. This item ensures the axle works smoothly and quietly throughout its life.

Complete Front Left and Right Assembly Set with Pre-Installed Hardware

You can fix the whole front end with this two-piece set. It comes with both the driver’s front-left axle and the passenger’s front-right axle. The output shaft nut and ABS ring are pre-installed on the driver’s side axle. This makes installation easier and helps ensure the wheel speed sensor can work correctly. Its ready-to-install design reduces setup time and ensures all parts are in the right place.

The matched pair ensures the drivetrain works well, and the pre-installed parts eliminate compatibility or installation issues. The full set includes everything you need to replace the front axle, so you do not need to buy or change any other parts.

Extensive Cross-Reference Compatibility with Multiple OEM Numbers

It works with all kinds of reference numbers, like CARDONE New 66-3720 and 66-3721, CARDONE 663720 and 663721, GSP NCV37002 and NCV37003, and Hollander 447-51357R and 447-51358L. The extensive cross-reference list makes it easy to find and ensures that the parts are available through multiple supply channels, all while maintaining OEM-level quality standards.

The standard numbering method makes it easy to see if something will fit a 2011–2014 Hyundai Sonata. The different reference numbers give you peace of mind when choosing a part and ensure you can get warranty support and technical help through multiple aftermarket channels.

Precision-Machined Hyundai Sonata CV Axle Components with Exact Dimensional Specifications

The precise machining process makes sure that every part is the exact right size for installation and function. OEM specs say that the left side should be 38 x 4 x 4 inches (969 x 103.5 x 103.5 mm) and the right side should be 26.4 x 4 x 4 inches (671 x 103.5 x 103.5 mm).

The precise measurements help installation go smoothly and help ensure that the splines engage correctly and the joint operates properly. The precisely cut parts fit perfectly for this Hyundai Sonata CV axle replacement, so there is no noise, shaking, or premature wear that can come from poorly made parts.

Advanced Boot Design with Superior Durability and Flexibility

The designed boot allows full suspension articulation and lock-to-lock steering movement without problems or premature wear. The flexible rubber design can withstand road impacts and suspension movement, and the seal keeps water and dirt out. The material of the boots does not break down when exposed to ozone or high temperatures.

They are more flexible and do not crack or split like standard replacement axles do, which leads to grease loss and joint contamination. The protective design lasts the axle’s service life and allows joint movement under all driving and loading conditions.

Installation-Ready Design for Both Professional and DIY Applications

For easy replacement, the installation-ready configuration includes the key parts needed for installation. Assembling is easier because the output shaft nut and ABS ring are already on the driver side. The plan works for both professional repair shops and skilled do-it-yourself mechanics.

The complete package and precise fit make replacement easier while helping the product perform well and support customer satisfaction. The high-quality construction and full hardware package give garage experts and weekend do-it-yourselfers confidence as they replace the CV axle in their Hyundai Sonata.