VEVOR Condenser Fan Motor with Capacitor, 1/3HP 1075RPM 208-230V, Compatible with GE Genteq K55HXGDD-81195 5KCP39GGY209AS, Fasco D925 D7908, Dayton EM3729F, Century FSE1036SV1, Rheem Ruud 51-100998-05

1/3 HP Condenser Fan Motor Rated at 1075 RPM for Steady Airflow Delivery

The VEVOR 1/3 hp condenser fan motor has a rated speed of 1075 RPM, ensuring your condenser unit gets the continuous airflow it requires for optimal performance. Under regular load conditions, the 60 Hz frequency ensures smooth and predictable rotor movement. This mitigates vibration and noise during operation. Whether you are servicing a domestic air conditioner or working on a light-commercial HVAC unit, this motor is the ideal replacement for your existing unit.

The single-phase design and 2.2A rated current help keep power consumption down without sacrificing performance. The 1/3 HP output is OEM-standard, which means factory-level reliability at a fraction of the cost of brand-specific replacements. This balance of power and efficiency ensures that the motor can handle typical condenser loads without tripping the circuit or overheating.

208-230V Single-Phase Input with an Efficient 2.2A Current Draw

This 1/3 hp condenser fan motor is rated for an input range of 208-230V, the standard voltage range of many residential and commercial HVAC electrical systems. The single-phase wiring makes hooking up straightforward, even if you are doing the replacement yourself instead of calling an expert. No transformer or power supply adapter is needed to connect and run the motor.

At maximum load, the motor draws just 2.2A of current. Your breaker panel won’t be heavily taxed, but you are pushing the fan blade to its full rated horsepower. That small upfront cost also translates into lower electricity expenses over months and years of continuous seasonal use. Add in the fact that it’s compatible with a wide voltage range, and the 1/3 hp condenser fan motor is a good fit for almost every conventional condenser application you’ll encounter in the field.

48Y Frame and 6.02-Inch Shaft for a Precise Drop-In Replacement

The 48Y frame is a common motor frame used in the HVAC industry, and this unit matches that frame, right down to the mounting bolt pattern, enabling a direct changeover. Common models from GE Genteq, Fasco, Dayton, Century, Carrier, and Rheem Ruud have a 0.5-inch shaft diameter and 6.02-inch shaft length. That means you may replace motors such as GE K55HXGDD-81195, Fasco D925 or D7908, and Dayton EM3729F without changing your existing mount or housing.

The motor’s compact 5.63 x 5.63 x 11.26-inch size ensures it fits within conventional condenser enclosures without clearance issues. At 14.33 lbs, it’s light enough for one person to install into place and fasten without a second set of hands. It’s a precise fit that eliminates the trial-and-error aggravation often associated with finding a suitable aftermarket 1/3-hp condenser fan motor.

Reversible CW/CCW Rotation with 47-Inch Cut-to-Length Wiring

The last thing you want to do is bolt a motor in place and find you have the wrong direction of rotation. This unit removes that problem. It allows for clockwise and counterclockwise rotation, so no matter how your original motor is configured, you can match it on the spot. For contractors who work with numerous brands and models, that reversibility translates to fewer SKUs to stock and fewer returns to handle.

The motor has a 47-inch cut-to-length wire for adequate reach from the motor terminals to your unit’s junction box. You cut it to the exact length your installation needs, so no excess wire can clutter the compartment and create possible contact points. The swing flexibility, the ready-to-trim wire, and the installation method from box to finished job without extra difficulties.

Pure Copper Coil and Stainless Steel Bearings for All-Weather Endurance

The core of this 1/3 hp condenser fan motor is a pure copper coil, which provides better electrical conductivity and heat dissipation than aluminum-wound options. Copper windings can withstand continuous thermal loads without deterioration, thereby prolonging the motor’s working life by thousands of working hours. The Class F insulation certification provides additional thermal protection and keeps internal temperatures well under acceptable limits for typical household condenser cycles.

The rotor shaft is supported by stainless steel bearings, which reduce friction and maintain low noise levels even after years of seasonal operation. Corrosion-resistant bearings are a must, not an option, because the motor is located outside and exposed to rain, humidity, dust, and temperature fluctuations. There is built-in overload protection with automatic reset for added safety: it shuts off the motor during electrical surges. It restarts it when conditions return to normal, so you don’t have to intervene to prevent burnout.

Bundled Explosion-Proof Capacitor for a Complete 1/3 HP Condenser Fan Motor Swap

VEVOR puts an explosion-proof capacitor in the box, so a new motor will always include a fresh capacitor, eliminating the extra trip to the supply house. This matched pairing ensures the motor starts promptly and reliably from day one, rather than relying on an aging capacitor that may be losing its ability to hold a charge. You save on the cost and the guesswork of finding a compatible capacitor yourself.

The explosion-proof structure of the supplied capacitor provides a considerable safety margin, especially in high-heat outdoor conditions, which can cause ordinary capacitors to expand and fail. Both parts are new and matched; you get clean starts and reliable running performance from the very first cycle. This all-in-one, one-session kit takes you from opening the box to a fully operational condenser unit, with no additional parts required.