VEVOR Condensate Pump, 1/24 HP, 110 GPH, 24 ft Lift, 100-240V Automatic AC Condensation Removal Pump with Safety Switch & 20 ft Tubing, for Air Conditioner, Dehumidifier, HVAC, Furnace, Ice Maker

Automatic Condensate Removal Pump with 110 GPH Flow and 24 ft Lift for Long-Distance Drainage

This automatic condensate removal pump has a maximum flow rate of 110 GPH and can push water up to 24 feet vertically. This means it can handle draining runs that regular gravity systems cannot handle. This pump reliably moves condensate, even if the drain point is across the room or through the ceiling. It does this without slowing down or losing pressure.

The pump works well in air conditioners, dehumidifiers, furnaces, ice makers, boilers, and other appliances. Consistent output prevents condensate from building up inside your equipment, protecting sensitive parts from water damage. This pump has sufficient head pressure to quickly and consistently clear every drop of water in situations where the drain line is long or runs uphill.

Upgraded Check Valve with Non-Return Ball for Backflow-Free Operation

Inside this condensate pump’s upgraded check valve is a non-return ball that stops water from flowing back into the tank after each draining cycle. This design ensures the system operates reliably, even if the drain line is long and horizontal or connects to a shared drain system with fluctuating pressure.

In condensate systems, backflow often leads to overflow and equipment damage. This scenario is especially true in setups where the discharge line dips or loops before it reaches the drain. There is no risk of that happening because the non-return ball closes the line as soon as the pump stops. In other words, your system drains completely every time it runs, leaving no water behind. This keeps the tank empty and the pump ready for the next use.

Quiet 30 dB Motor Design for Noise-Free Indoor Environments

This automatic condensate removal pump produces no more than 30 decibels of noise when measured at a distance of 1 meter from the unit. This pump is good for bedrooms, living rooms, home offices, and basements, where a clicking or buzzing pump would be too loud during the day or at night to sleep.

The motor design reduces vibration and mechanical clicking, two of the main causes of noise in condensate pumps. This pump starts and runs smoothly throughout its cycle, rather than making a loud noise every time the float rises. After installation, people who used to tolerate a noisy condensate pump under their mini-split or in their utility room will notice the difference immediately.

Multiple Protection Systems for Safe and Uninterrupted HVAC Performance

When it is working normally, this pump does not need any help from you. It starts automatically when the condensate reaches a certain level and stops when the tank is empty. If the system detects an overload or blockage, it shuts off the pump and alerts the user so they can fix the problem before it damages the equipment.

The motor does not run dry, which is one of the main reasons condensate pumps break down early: the built-in overheat safety. This safety feature protects the motor when condensate production is high or when drainage flow is low. HVAC systems, furnaces, and dehumidifiers can all use a pump that checks its state and stops running when it detects a problem, rather than continuing to run and cause damage.

ABS Housing Rated for 140 °F Temperatures for High-Heat Applications

The ABS housing of the pump body can handle condensate temperatures up to 140 °F (60 °C). Because of this capability, it works perfectly with condensing furnaces and boilers, which produce condensate hotter than that from regular air conditioners. A pump with a lower temperature rating would fail quickly under these conditions, but this housing maintains structural integrity even after prolonged exposure to heat.

Within that tough housing, the 1/24 HP motor provides steady pumping power. Together, the motor and housing give the pump the performance it needs to work year-round, during both heating and cooling seasons. If you use the unit as an air conditioner in the summer or a furnace in the winter, the materials and motor will not break, crack, or lose their ability to pump.

Automatic Condensate Removal Pump with Four Inlets and Full Installation Kit for Flexible Setup

The 0.45-gallon tank of this automatic condensate removal pump has four inlets, so it can connect to multiple appliances at once or connect pipes of different sizes from a single source. Installers do not need to use extra fittings or adapters to connect equipment with non-standard drain line diameters because the inlet configuration is flexible.

With a 20-foot drain hose, a filter, cable ties, and an adapter included in the package, installers do not need any additional parts to finish the job. The pump works with standard electrical systems in many places because it runs on AC 100–240V at 50/60 Hz. You can easily connect mini-split air conditioners, condensing furnaces, dehumidifiers, and ice makers to this pump, which makes it a single solution for managing condensate from multiple appliances.