VEVOR Commercial Shop Vac, 11 Gallon Wet Dry Shop Vacuum, 5.5 Peak HP Portable with One-Button Self-Cleaning, 1350W Input, 1.25in x 7ft Hose, 20ft Cord, Industrial-Grade for Jobsite, Workshop

VEVOR Shop Vac Wet Dry Vacuum with 5.5 Peak HP Motor at 1350W for Industrial-Grade Suction

The VEVOR shop vac wet dry vacuum features a 1350-watt motor, delivering 5.5 peak horsepower. That much suction can tackle even the worst messes without slowing down. It only takes a few seconds for sawdust, construction debris, wet spills, leaves, and food waste to go away. Suction stays strong during cleanup.

This motor power makes it very clear that it is for business and industry. It works better than most consumer-grade shop vacs, which often struggle when used a lot. The motor gives you steady, strong suction from start to finish, whether you’re cleaning up a flooded basement, cleaning up a job site after framing, or detailing the inside of a car. It won’t overheat or fade.

11 Gallon Tank Capacity for Fewer Stops During Large Cleanup Jobs

This shop vac wet dry vacuum has an 11-gallon tank that holds about 42 liters of dirt or water before it needs to be emptied. This big capacity is what makes a commercial vacuum different from a light-duty home vacuum. You can clean for extended periods of time between empties. Fewer stops mean the task site is completed faster overall, especially when many people are working there.

The big tank can hold both dry trash and liquid waste without changing attachments. There is always mixed garbage at construction sites. In one session, you can put concrete dust, wood shavings, spilled water, and mud all in the same tank. The 11-gallon capacity lets you handle everything without stopping to empty the tank, thanks to the full tank warning.

One-Button Self-Cleaning Filter That Restores Suction Instantly

The main reason the shop vac suction drops during operation is that the filter gets clogged. This shop vac wet-dry vacuum features built-in one-button self-cleaning technology that solves that problem. Pressing the button makes the filter shake off any dust and dirt that has built up on it. The suction power returns right away without stopping or removing the filter.

This function eliminates the annoying suction loss that occurs in the middle of a work session with regular shop vacs with fixed filters. You don’t have to stop, open the machine, take out the filter, shake it outside, wait for the dust to settle, and then put it back in. One press of a button does it while the machine stays on the ground in front of you.

Shop Vac Wet Dry Vacuum with Dual Filter System for Both Dry Debris and Wet Flood Cleanup Applications

This vacuum has two distinct filters suited to different types of cleaning. The cylindrical filter can pick up particles as small as 30 to 50 microns and can be used for both dry and wet vacuuming every day. When used normally, this filter does a good job of catching fine dust, wood shavings, and other small debris.

The sponge filter is included to clean up basement floods and pick up heavy liquids. This filter catches silt, wood chips, branches, and other large, wet debris you might find when cleaning up after a flood. With both filters included, the vacuum can go from cleaning up a dry job site to removing water in an emergency without having to buy more parts.

7 ft Hose and 20 ft Power Cord for Extended Reach Across Large Work Areas

The hose is 1.25 inches in diameter and 7 feet long, allowing it to reach farther from the vacuum body to the work area. The overall working radius, which includes the 20-foot power cord, covers most workshop floors, vehicle interiors, and job-site areas without requiring frequent machine movement. The long cord is especially useful on building sites because there aren’t many outlets and they are usually toward the edges of the space.

Users reported the hose was strong and didn’t kink during use. The 1.25-inch diameter keeps the machine’s airflow strong throughout the 7-foot length without losing much suction. Professionals can clean effectively without being tied to the power source all the time because they have a long hose and a lengthy cord.

3 Vacuum Attachments for Tight Spaces, Car Interiors, and Floor Surfaces

This shop vac wet dry vacuum comes with three nozzle attachments. The wet-dry nozzle can take up both solid and liquid trash from floors and other surfaces. The utility nozzle cleans upholstered surfaces, such as automobile seats, fabric cushions, and carpets. Standard nozzles can’t reach tight spots like car door compartments, air vents, cup holders, and narrow floor gaps. But the long flat nozzle can.

With three attachments made just for this purpose, you don’t need to buy a separate vacuum for cleaning cars or furniture. One vacuum can clean all kinds of surfaces in the workshop, garage, and inside the car. You can easily connect and disconnect each attachment without tools.

Compact and Portable at 19.1 lbs for Easy Transport Between Job Sites

This shop vac wet dry vacuum features a commercial-grade motor and can hold 11 gallons of water, yet it weighs only 19.1 pounds. This upright design doesn’t take up as much floor area as circular shop vacs do. Verified buyers said this one is easier to carry and store than large cylindrical ones, which take up a lot of space in the garage or workshop.

The unit is light enough to move between rooms, floors, or other job sites without help. People who work in construction and move equipment between sites every day know how much weight counts over the course of a long workday. This vacuum weighs 19.1 pounds when empty, so it can easily go from the truck to the job site and back without being a problem.