VEVOR Blower Fan, 13 in Portable Utility Floor Fan, 300 CFM, 3 Speeds, Multi-Angle Airflow, Lightweight Portable High Velocity Air Mover, for Drying, Dehumidifying, Carpets, Air Circulation, Cooling

VEVOR 300 CFM Blower Floor Fan Delivers 14.9 m/s High-Velocity Airflow for Rapid Floor Drying

Wet floors are still dangerous and annoying after a spill or a deep cleaning. The VEVOR blower floor fan solves this problem directly by blowing air at up to 14.9 m/s and moving 300 CFM. It speeds up the evaporation of water on wet floors, damp carpets, and moisture-laden subfloors, in much less time than passive drying.

This airflow makes the fan a practical choice for home and business drying. The high-speed output follows the moisture at the surface, where evaporation begins. It reduces drying time and prevents mold and odors from building up in damp, poorly ventilated areas.

0°–270° Manual Angle Adjustment on This Blower Floor Fan Targets Floors, Walls, and Corners

Static airflow direction wastes energy and completely misses problem areas. With a full 0°–270° manual angle adjustment range, this floor fan lets users aim airflow exactly at floor surfaces, vertical walls, tight corners, or any combination of these surfaces as needed for thorough moisture removal and indoor air circulation.

This adjustable airflow direction is especially useful in rooms, hallways, and enclosed utility spaces that aren’t rectangular, where fixed-direction fans create dead zones. Users can achieve better drying results without moving the unit around much by directing airflow toward wet walls or low-lying corners.

3-Speed Configuration, 170, 210, and 280 CFM, Matches Airflow Output to Every Task Requirement

The difference between a professional-grade blower floor fan and a basic household unit is that the professional-grade fan can control airflow with greater precision. The VEVOR model has three speed settings for different uses: different airflow levels for ventilation, drying, and circulation.

This tiered system is good for operators because it saves energy on lighter tasks while still giving higher airflow output when needed. You don’t need any tools to switch between settings, and it only takes a few seconds. This feature makes it easy to make changes on the fly during multi-phase drying or ventilation workflows.

Daisy-Chain Support for 2 Units from a Single 120V, 14-AMP Source Doubles Coverage Area Instantly

For drying large areas, you need more than one fan working at the same time, and you don’t want to run separate extension cords to each one. This floor fan can daisy-chain up to 2 units from a single 120V power source via a standard 120V outlet. It effectively doubles the airflow coverage in flooded rooms, large carpeted areas, or commercial spaces with multiple zones.

The ability to daisy-chain makes setup easier and eliminates cords that can trip people up in busy work areas. With the included 10-foot power cord, you can place the units in various configurations. They can both reach farther outlets without needing more power infrastructure or outlet access.

13-Inch Fan Diameter and 6.3 lb Lightweight Frame Enable One-Handed Transport Between Work Zones

How easily a blower floor fan can be moved from place to place in one workday depends on its portability. The VEVOR unit has a 13-inch fan diameter and weighs only 6.3 pounds, making it easy for one person to move between rooms, floors, or job sites without extra effort or tools.

A built-in handle makes it easy to carry with one hand, leaving the operator’s other hand free to open doors, use tools, or perform other tasks. This ergonomic design choice accounts for how the unit will be used on-site, where workers need to move quickly and easily rather than having a stationary appliance bolted to one spot.

Multi-Surface Application Covers Carpets, Hardwood, and Concrete Efficiently

Different types of flooring hold moisture in different ways, so airflow delivery needs to be flexible rather than the same for all types. The fan works on carpets, hardwood, tile, and bare concrete. It blows air in different directions at different speeds to pull moisture out of fibrous materials and quickly dry up water on hard, non-porous floors.

The 210 CFM setting with a low-angle airflow direction pushes air continuously under and through carpet fibers, where moisture often collects, to dry the carpet. When using a higher speed setting and a flatter angle on hard surfaces, the surface dries faster, making the floors dry and walkable more quickly than with traditional ventilation methods.

10-Foot Power Cord Length and 120V Compatibility Make the Fan Universally Deployable

Most buyers don’t think about cord length until the fan can’t reach the nearest outlet from the best place to put it. The VEVOR blower floor fan solves this problem with a 10-foot power cord, which extends placement flexibility. It means that in most standard residential and light commercial installations where outlets are spaced out in a typical way, you won’t need as many extension cords.

This unit works with standard 120V power and uses standard 120V power. It fits right into North American electrical systems without needing special circuits, adapters, or wiring. The fan can be used right away in almost any indoor space it enters because it works with any voltage and has a long cord. It includes finished living spaces, unfinished utility rooms, and job sites.