VEVOR Backwash Hose, 2 in x 100 ft, Blue High Quality PVC Hose, with Clamps, Camlock, Aluminum Fittings, Fit Various Pumps, for Sewage Treatment, Water Transportation and More Agricultural Purposes

VEVOR 100 ft Backwash Hose Delivers 2-Inch Bore for Maximum Flow Capacity

The VEVOR 100 ft backwash hose has a 2-inch outer diameter and a 1.5-inch inner diameter. It is designed to handle high water discharge in tough industrial and agricultural settings. This wide-bore design ensures that the flow is as low as possible. This feature makes it perfect for moving large volumes of liquid, slurry, or semi-solid materials in a single long run without losing pressure.

The 2-inch passage lets water flow out quickly, whether you’re in charge of sewage treatment or using a submersible pump on a construction site. The full 100-foot length means you don’t need to connect multiple hoses, reducing the risk of leaks and improving the performance of long-distance pumping setups.

1.0mm Wall Thickness High-Density PVC Resists Tearing, Impact & Corrosion

This backwash hose is made of high-density PVC with a precisely engineered 1.0mm wall thickness. It can withstand tensile stress, impact damage, tearing, and chemical corrosion in environments where it is used regularly. The layered-braided structure strengthens the inside of the hose wall, evenly distributing mechanical stress and preventing collapse under suction or bursting at high discharge pressure.

This hose is made of a rust-resistant material, making it suitable for both clean water and harsh liquids such as sewage, irrigation runoff, or chemically treated pool water. Even after being outside a lot, going through UV cycles, and bending a lot, these hoses will last a long time. These are all things that would ruin regular garden or utility hoses in just one season of heavy use.

Camlock Aluminum Fittings Enable Quarter-Turn Connection Across 4+ Pump Types

The kit includes camlock couplings and aluminum fittings, precision-machined for secure connections to a wide range of pump outlets without tools. Camlock fittings feature a quarter-turn locking mechanism that eliminates the need for threaded joints. It saves time during setup and provides a watertight seal that withstands repeated connect-disconnect cycles in all kinds of weather.

Aluminum fittings won’t rust, even in wet, muddy, or chemically active places. This 100 ft backwash hose works with almost any brand of centrifugal, diaphragm, or submersible pump because it features a camlock fitting and is made of aluminum, which lasts a long time. It supports broad multi-pump compatibility in many common setups without needing extra adapters.

100 ft Backwash Hose Stainless Steel Clamps Deliver Zero-Drip Sealing at 2-Inch Connection Points

The kit includes two stainless steel clamps designed to create a tight seal between the hose body and the 2-inch pump fittings. Stainless steel doesn’t rust and keeps its clamping torque over time. Zinc or galvanized alternatives, on the other hand, corrode and loosen over time when exposed to water and chemicals.

The clamp design lets you tighten it with tools on the job site, creating a plumber-grade seal without tape, glue, or extra gaskets. It helps create a connection that resists dripping and stays strong even when water is flowing continuously. It is very important to pump near electrical equipment, crops, or sensitive drainage systems, as water spills can cause measurable damage.

100-Foot Flat-Roll Design Cuts Deployment Time by Eliminating Mid-Run Joints

The VEVOR 100 ft backwash hose is designed to bend, fold, and roll flat for storage in a small space. It is an important operational benefit when moving equipment between farmland irrigation zones, pool service locations, or multiple construction sites. Even though it is 100 feet long, the flexible PVC body coils without kinking, making it easy to wind tightly onto a reel or stack it in the cargo area of a vehicle.

This feature makes it much easier to set up and take down. Workers can deploy the full 100-foot length in minutes and re-coil it just as quickly. This reduces downtime compared with rigid piping systems or heavier rubber hoses that don’t compact and require special storage space between job sites.

1.5-Inch ID Handles 5 Scenarios for Pools, Farmlands, Factories & Construction

This backwash hose is designed to work in many situations, including draining pools, watering crops, cleaning up spills on factory floors, treating sewage, and drying construction sites. It has a 1.5-inch inner diameter that can handle both water and mixed-solid waste. It means that it can clear sediment-filled backwash from sand pool filters just as well as it can move clean irrigation water across long rows of farmland.

The hose is well-suited for factories and other industrial applications because it can handle oils, mild acids, and wastewater with a high particle count, as found in manufacturing drainage systems. Construction workers depend on its 100-foot reach to reach sumps, trenches, or foundation drainage points that are far from the pump station. Few standard short hoses can do this in a single continuous run.

Single-Kit Compatibility Covers 100 ft Reach with All Fittings Included

The whole kit includes everything you need to set up the pump right away: a 100-foot hose body, a camlock coupling, aluminum fittings, and two stainless steel clamps. This all-in-one design eliminates compatibility concerns, lowers the total cost of accessories per job, and prevents delays on the job site caused by missing hardware.

The 1.5-inch ID specification is set up to fit the outlet sizes of the most common residential, agricultural, and light industrial pump models on the market today. Users don’t have to buy separate adapters for each pump brand, and the design is so flexible that it can handle any job that requires moving liquids or solids, from clean water irrigation to heavy sewage discharge, without requiring any changes.