VEVOR 30″ x 24″ Stainless Steel Backsplash for Stove, Ultra Flat Splatter Guard, Wall Shield Range Hood Backsplash, Easy Clean Kitchen Wall Metal Panel, Pre-Drilled Holes for Easy Installation, Silver

760 x 610 x 0.7mm Stainless Steel Backsplash for Stove Coverage

Measuring 760 x 610 x 0.7mm (29.92 x 24.02 x 0.0276 in), this stainless steel backsplash for stoves is large enough to cover the splash zone behind a typical residential range completely. The panel’s height and width are designed to capture grease and sauce splatter across the cooking width, rather than just in a small area right behind the burners, where less expensive, smaller splash shields usually fall short.

The panel avoids the bulky, raised-edge appearance of metal shields by sitting almost flush against the wall, with a thickness of just 0.7mm. For anyone attempting to maintain a tidy, purposeful kitchen look while still shielding the wall behind their stove, its ultra-flat profile makes the backsplash appear like a built-in wall finish rather than an obvious add-on panel.

SUS430 Stainless Steel for Heat and Rust Resistance

This stainless steel backsplash for stove use is made of SUS430 stainless steel and is designed to withstand the heat and moisture conditions just behind a stovetop. Even with frequent exposure to steam, oil splashes, and temperature fluctuations, conditions that would corrode painted metal or lower-grade steel panels within a year or two of regular cooking, the 430-grade alloy resists rust formation.

Additionally, this material selection guards against warping under prolonged heat, which is a common cause of failure for backsplash panels placed too close to high-output electric coils or gas burners. SUS430 steel is a long-lasting wall protector rather than a temporary fix, as it maintains its flat surface and finish over years of regular cooking, unlike laminate or tile alternatives that may crack or discolor from heat stress.

4.74 Lb Lightweight Panel with 2.15 Kg Total Weight

This stainless steel backsplash for stove use weighs 4.74 pounds (2.15 kg), making it manageable for one person to carry and install without extra support hardware. This has an immediate impact on installation: heavier metal- or tile-based backsplash systems frequently require additional anchors rated for substantial weight, along with reinforced mounting points, which complicate and prolong what should be a simple wall panel installation.

Rigidity is not sacrificed to reduce weight. Unlike thinner plastic splash guards, the steel panel remains flat once installed and does not sag or bow over time. A lighter panel also reduces strain on the mounting points, improving the installation’s lifespan in kitchens with limited wall studs or backing material.

4 Pre-Drilled Corner Holes for Fast Wall Mounting

There is no need to measure, mark, and drill your own mounting locations before installation because each panel comes with four pre-drilled holes, one at each corner. This stovetop stainless steel backsplash is designed for a straight screw-and-mount method, which involves aligning the panel, marking through the existing holes, and fastening it in place without drilling into stainless steel, which is notoriously difficult to drill cleanly without specialized bits.

Because the hole placement is factory-set rather than manually calculated, this pre-drilled method also guarantees consistent, symmetrical attachment every time. This eliminates the most technically challenging stage of installing a metal panel and replaces it with a simple four-point screw-in procedure.

0.7mm Ultra-Flat Design for Easy Grease Wipe-Down

Not only does the 0.7mm ultra-flat surface save space, but it also directly impacts how easy it is to clean the panel. Grease and cooking debris rest on top of the panel rather than gathering in the grooves or along the edges, which is a common maintenance problem with textured or paneled backsplash designs. When the surface is smooth, low-profile, and free of elevated seams or ridges, it is less likely to occur; however, this is not the case.

Standard grease accumulation can be cleaned off with just a moist cloth or paper towel; no dish soap or scrubbing is required. Compared to painted or tiled backsplashes, where grout lines and textured surfaces retain grease and require more aggressive cleaning chemicals and effort to maintain a consistently clean appearance, this is a significant advantage for daily use.

Stainless Steel Backsplash for Stove Available in Multiple Sizes

Although the 760 x 610mm panel is included in this sale, other sizes of this stainless steel stove backsplash are available to suit a variety of stove widths, wall arrangements, and kitchen layouts. Customers can choose dimensions that more closely match their specific range and wall area, rather than squeezing a one-size-fits-all panel into a spot it wasn’t designed for.

For kitchens with non-standard stove placements, small galley layouts, or wall space that exceeds the usual range width, this flexibility in sizing is important. Regardless of the kitchen layout, selecting the right-sized panel from the start ensures the backsplash fulfills its primary purpose: providing complete splash protection by preventing gaps along the edges where splatter can still reach the wall.