VEVOR 3/16″ Brake Line Repair Kit, 45° Double & Single Brake Line Flaring Tool Kit, 25FT Copper Coated Brake Line (with 16 Fittings & 4 Unions) – Tube Cutter, 5 Adapters and Toolbox Included

Complete 3/16″ Brake Line Repair Kit with All Essential Components Included

The VEVOR 3/16″ brake line repair kit comes with all the tools you need to fix or change a brake line. It includes 16 fittings, 4 threaded unions, 5 adapters, a flaring bar, a flaring cone, a tube cutter, and a 25-foot copper-coated brake line. Starting does not require any other purchases.

Having all the parts in one kit saves time compared to sourcing each part separately. Mechanics and DIYers can fix things in one session, from cutting to flaring to fitting. The 3/16″ brake line repair kit is a useful, ready-to-use option because it comes with everything you need.

25FT Copper-Coated Brake Line for Durable and Corrosion-Resistant Performance

A 25-foot copper-coated brake line is a lot of material for a single replacement job. Copper treatment adds a layer of protection that prevents rust, water, and road salt from reaching the metal over time. The coating also makes it easier to bend the line and run it through tight spots on the frame.

If the length is long enough, technicians can replace long runs without having to join several short pieces together. With fewer joints, there are fewer places where the repaired brake line could leak. The copper-coated design strikes a good balance between flexibility, strength, and corrosion resistance, so it will last a long time.

45° Cone Design for Precise Single and Double Flare Formation

The flaring cone can make both single and double flares at a 45° angle, and the shape stays the same every time. Most OEM brake system standards call for double flares because they make the joint stronger and less likely to leak than single flares. The 45° cone angle is the same as what is required for standard flares on both domestic and foreign cars.

Correct flare geometry ensures that parts fit inside properly, without gaps or distortions. Poor flares are a main reason why brake fluid leaks, so it is important to have accurate tools for safety. The 3/16″ brake line patch kit is a 45° cone shape, which assures consistent, expert results on every flare.

Hardened Carbon Steel Flaring Tool for Structural Stability Under High-Force Use

We made the flaring bar and cone from hardened carbon steel, so they will remain strong even after many uses. The strong mechanical force needed to make tight, exact flares does not change the shape of carbon steel. It takes more work to fix flaws caused by soft tool materials that change shape over time.

The flaring tool’s hardened build makes it last much longer than most consumer-grade options. The tool remains the same size after dozens of flaring rounds, showing no wear or deformation. Hardened carbon-steel parts last a long time, which is good for mechanics who frequently have to repair brake lines.

Wide Tube Compatibility Across Multiple Sizes and Materials

Compatible tube outside diameters are 3/16″, 1/4″, 5/16″, 3/8″, and 1/2″. Metals that work together include copper, aluminum, and thin-wall steel tubing. These are the most popular types of brake and hydraulic lines. The five adapters that come with the kit make it even more compatible with a wider range of vehicles and systems.

The kit is useful for more than just brake line work because it works with a wide range of sizes and materials. You can also use transmission cooler lines and HVAC tubing in this range. You only need one kit to fix many different things; you do not need extra tools for different tube sizes.

Clear Alignment Marks and Top Handle for Accurate and Controlled Flaring

The graduation lines on the flared bar are very clear, helping you quickly and accurately place the tube before each flare. The marks eliminate all guesswork in finding the right tube depth in the bar for a flare of the right size. In a replacement job, consistent positioning makes flares that are the same on every tube.

While the flaring stroke is in progress, the top handle on the flaring cone keeps the tool steady and the tubing in place. A good grip helps prevent slipping, which can cause flares to be off-center or deformed. Together, these two features give technicians greater trust and control throughout the process.

3/16″ Brake Line Repair Kit with 16 Fittings, 4 Unions, and 5 Adapters for Versatile Brake Line Installation

For a wide range of connection needs, the 3/16″ brake line repair kit comes with 16 brake line fittings, 4 threaded unions, and 5 adapters. Fittings and unions make safe, leak-free connections between new and old line parts. Not having enough of the right fittings or adapters on hand can cause repairs to take longer than planned.

The five adapters make it easier to use with a wider range of car thread patterns and port configurations. It is helpful to have many fitting options, especially for older cars, where it can be hard to find a gear that fits the original. The full hardware package ensures techs can fix most brake lines without having to look for other parts.

Durable Toolbox Included for Organized Storage and Easy Job-Site Portability

All of the parts in the brake line repair kit come in a sturdy, well-organized case. Separate sections keep the tube cutter, flaring tools, fittings, and adapters safe and separate when not in use. When you store things in an organized way, you do not lose parts, and setting up for each job is faster.

Moving tools easily between bays, job sites, or cars is easy with this small case, which keeps objects from moving or tangling. A well-organized kit also makes it easy to ensure all the parts are there before trying to fix something. The toolbox that comes with the set is more useful than the tools themselves.